Product Manufactured :

[a] EPOXY BASED COATING.

[b]  ACRYLIC BASED COATING

Concrete & Wood coating          Durotric,
Cementious Mix Coating            Durocemix.

[c]  ACRYLIC BINDERS   Dis-CM, Dis-BDF, Dis-CL.                       

[A]  EPOXY BASED COATING :

[a] ANTICORROSIVE COATING

Introduction  :

Air-drying solventless / solvent based Epoxy based coating being extensively used in highly corrosive Chemical industries  / Coastal Zones to resist chemicals and corrosion to prevent deterioration of structure.   In general, solvent based synthetic paints characterized by properties such as low DFT and inhabitant porosity, whereas the epoxy based systems have high resistance films.

Field of  Applications :

M.S.  Beam  &  C-channels  for  Corrosive chemical  industries .
M.S.  Grills  & Gates for Residences, & Hotels at coastal Zones.
M.S.  Floating drums of Biogas plants.
Chases and Mudguards of Vehicles.
Flooring  and  Mortar  Lining  in  chemical  plant .

[b]  BIO-GAS  PLANTS  COATINGS  :

Introduction :

In biogas plants fixed dome, there has been common draw- back that its dome develops hair cracks, which are not seen with the naked eye, through which the gas stored leaks out.   The conventional method of repairing is either with applying oil paint or tar coat over plastering the inner surface has not proved to be result oriented as a film of oil paint is too thin and tar does not have good bonding with any cemented surface and even plaster also develops cracks and peels off due to change in compressive strength between the old and new plaster.

Ultimately, due to large number of failures of Fixed Dome Plants, people lose faith in this particular model and opt for Floating Gas Holder Plant, through it is a well know fact that Fixed dome type plants have various advantages over the other model such as reducing cost factor, longer life, less maintenance, utilization of space over the dome etc.

To overcome this burning problem of gas leakage’s from fixed –Dome Type model, we therefore For over past decade, have introduced an unique product DIBHAPOXY-225  which has rendered us excellent result and has  proved to be an ultimate solution to the said problem.   Our product has very widely been used by Semi government and even with Private voluntary organizations basically engrossed with the constructions of Biogas plants.

Field  of  Application  :
Coating Dome from Inner surface of Bio-gas Concrete plant.

[c]  FLEXIBLE COATING :

Introduction  :
Epoxy by nature is brittle on complete curing.  With the R & D, to day the company has specially manufacture the components, which even on complete curing have flexibility properties.   The said system is solventfree, loaded with extenders to match the desired application at end use.

Field of Application  :

Bridging the gaps in cracks.
Cementing the aluminum section in flameproof fitting and fixtures.
Potting component to capacitor, cable joints kits.
Lamination to wood / metal articles for transparent glossy finish.

[d]   WALLS &  FLOOR COATING :

Introduction  :

Epoxy based solvent free , pigmented, high solid to achieve maximum DFT to walls and floors consumed for  protective cum decorative coating for concrete , Wood  M. S. surfaces .

Being Epoxy system it resist Abrasion  & Chemical like Acids, Alkali, and few solvents and even to saturated solutions of bleach, sugar solution, brine water, urea etc.  Having long –lasting tough bonding to IPS, KOTA STONE, MOSAIC, GALAZED TILES, coating are to maintain dust proof properties and the floor/walls are left with no joints on completion of job.     Moreover, the system is such formulated that it even resists the U V rays and the coating is free from the fungus.  Over and above the complete system is formulated to match the required shade of walls/floors.

Field of Application:  

Anticorrosive coating to Complex Chemical plants.
Decorative coating to residential complex  & Hotels  & Restaurants.
Protective coating to Walls in pharmaceutical plant.
Coating in other Industries such as Hospitals, Nuclear Plants, Textiles, Electronic Industries, Photo Division, etc.                                                         

[e]   WATERPROOFING COATING  :

Introduction  :

Since building construction activity as gained enormous uplift, it is know fact that the whole construction activity has been commercialized.  Repercussion of which are drasting and uncontrollable Ones of these is  “LEAKAGE” infect it is a LEAK AGE, To overcome leakage problems, many conventional methods are prevailing in the market, but these treatments have not proved to be result oriented due to which waterproofing still remains a” pressing” problem.

We, therefore, on regular study and continues discussions have formulated the system based on Epoxy resin to overcome the leakage problems.  The basic salient features are cited hereunder:

SAILENT FEATURES:

 * It chemically cures at 30C. and no additional curing method is required.
 * Being Waterbased Epoxy, it can be applied on damp surfaces unlike pure Epoxy resin.
 * It is odorless, non-flammable, non-toxic, enhance it can even be applied in potable water  
   tanks.

Field of Application  :

Application on terrace.
Application on plywood’s.
Application on Water tanks.
Application on Newly castled top slab.
Application to Treat efflorescence/latencies.
Application for Bonding of Old concrete to new concrete.
Application on Fixing marbles/granites/ fine finished decorative stones.
Application  to fill cracks of Bathroom, Toilets, doors, windows, aluminum section, and asbestos sheet.

[B]  ACRYLIC  BASED COATING : 

[a] CONCTRETE & WOOD :

CONCRETE :
“DUROTRIC, acrylic solution produces hard, yet flexible clear transparent film. Its film is non-yellowing and has excellent resistance to water, alkalis and contains a UV absorber to improve protection from ultraviolet light. Moreover, it can be applied with High Density PU Foam and can also be sprayed for even coating.

APPLICATION:
Durotric acrylic solution is ideally suited  for :

Slate sealers
Chequered Tiles
Interlocking Pavers
Decorative Natural Stone / Tiles
Concrete and masonry protection
Clay mould Mangalor & Kollam Type Roof Tiles

WOOD :

“Durotric” acrylic solution produces hard, yet flexible clear transparent film. It can be used in as filling agent as clear sealing primer on wood with a high content of bleeding substance.  This product seals the bleeding of this substance and protects the top coat against discolouration, blistering and adhesion loss. Moreover, it can be applied with High Density PU Foam and can also be sprayed for even coating.

[b]  Cementious Mix Coating :

“DUROCEMIX” is an modified Acrylic Polymer with 45% solids, Milky white Emulsion appearance with
9.0–9.5 pH, specially formulated for the cementations motors for range of applications in today’s
Construction activities.  Being acrylic polymer, the desired properties for waterproofing, crack filling for
internal & external plasters, the ratio consumed is cited hereunder : 

ACRYLIC BINDERS :

Binders are especially formulated for the Construction Industries for the various applications during the job.  And are best compatible with both White as well as Grey Cement. 

Field of application:

1. Binders to Plasters, Waterproofing, Cracks Fillings,

2. Binders to Dry Cement Paints to cut the cost effective and best performance.