Manufacturer :
Speciality Coating & Chemicals based on Epoxy & Acrylics
   
   
   
 

“ Figment-CPC ” (Coating Protects Concrete )

 

INTRODUCTION:

“Exterior painting plays a vital role in the Construction Industries not only to give Building better appearance but also to protect the same from rainwater in monsoon cum the extreme climate in our country.  If proper coating is not coated, involves recurring expenses of repairs as well as repainting of walls every four to five years.

Several types of polymers are used in Coating Concrete such as Lime, Dry Cement     Paint, Epoxies, Polyurethane, Polyesters, Acrylic copolymers, Styrene acrylics and styrene butadiene. Coatings applied to concrete should be typically barrier coatings. Further, it should provide protective by becoming a physical barrier, thus isolating the concrete from its immediate environment.  Moreover, it prevents aggressive liquids and gases from passing through it and reaching concrete.

Keeping in view, we have developed “Figment-CPC” [Coating Protects Concrete], Flexible Emulsion to Interior & Exterior wal“Figment-CPC is Emulsion produces hard, yet flexible, texture film.  Its film is non-yellowing and has excellent resistance to water, alkalis and contains a UV absorber to improve protection from ultraviolet light. Moreover, it can be applied with brush and can also be directly applied by roller. Being, water repellent properties it acts as Waterproofing, Anti-fungus to Exterior walls. And more often, even if applied inside the walls gives excellent washable properties.

SALIENT FEATURES:

  • Radiant barriers coating for solar insulation [i.e. Insulation coating]

  • Water based coating and hence Environmentally friendly, Safe, Non-flammable, Non-toxic and even thinned & tools cleaned by tap water.

  • Compatible to almost all substrates such as wood, cement, stucco, plasters, dry-walls, stones and metal.

  • Being Elastrometric/flexible, bridge the hair-cracks and stops further growth. 

  • Resistance to both hot and cold climates.

  • Can be tinted to customer’s choice of Light colors.

APPLICATION AREA:

On Roofs:         Heals to block the transfer of heat inside the roof
On Exteriors:    Helps to block the transfer of heat inside the room
On Interiors:     Helps to block the transfer of heat outwards.
 

TYPICAL PROPERTIES:  

Type

:

Thermoplastic Co-polymer Emulsion
Appearance

:

White viscous solution
Solids

:

60%
Solvents

:

Water
Viscosity

:

High Viscous.
Cured film

:

Flexible, elastic and tough.
Touch to dry

:

Approx. 2 hours.
Total Hardness

:

Within 24-30 hours.
UV Resistance

:

Excellent
Impermeability

:

Excellent
Insulation

:

Excellent
Primer

:

FIGMENT-SPC / DP-225.
Coats Recommend

:

Two coats over the primer
Coverage

:

60-70 Sq.ft / Two Coats 
[1st coat water 30% & 2nd coat water 20%] 

Should you require any furthermore information please call us for verbal discussion:-

Powered by : Needs Information Services Limited