DIBHALITE - CRC
(Soleventfree - an Anticorrosive Coating )

INTRODUCTION :

DIBHALITE-CRC, is two component, air drying solventless Epoxy based coating  being  extensively used in highly  corrosive Chemical  Industries to resist chemicals and corrosion and to prevent deterioration of both M S. & Concrete structures. In general practice solvent based paints characterized by properties such as low DFT and inhabitant porosity, whereas  DL-CRC is  non-porous  and   have high resistance films. The system is specially formulated for the end users by eliminating of  weighting odd quantities by introducing two component system mixed   before application  in equal  proportions volume.

Being solventless Epoxy based system have prominent property like freedom   from  fire cum pollution hazard.  The major field of applications in fertilizers & paper plants; chemicals manufacturing industries, motor formulation used as Industrial flooring; coating on ships; pipes; sewage drains effluent  treatment plants, even for Rubber Industries mainly engrossed with Rubber Lining Jobs.

TECHNICAL PROPERTIES (Prominent properties)

Ratio

:

Resin    part      1 PBV    1.0 PBW
Hardener part     1 PBV    0.8 PBW
Pot life of mix

:

20 to 30 min. at 35`c
Viscosity of mix

:

7000-8000 CPS
Coverage

:

Mild steel   40 - 50 sq.ft./per coat with 250 microns 
Concrete   40 - 45 sq.ft./per coat  with 250 microns
Curing

:

Gets completely cured at 300C . within 5-7 days.
Visual Appearance

:

On complete curing…………GLOSSY REDDISH BROWN
Shelf - life

:

Min. 12 month stored at cured and dry place
in sealed Containers.

PROTECTIVE COATING TO M.S.STRUCTURES

PRIMER                DIBHAPOXY - 400   [ Application as cited in literature ]
TOP COAT           DIBHALITE  - CRC                    [Two coats]

or

PRIMER                 DIBHALITE - LV       [ Application as cited in literature ]
TOP COAT            DIBHALITE - CRC                       [Two coats]

PROTECTIVE COATING TO CONCRETE STRUCTURES

Old Concrete Surface should be examined for structural soundness. Unsound  areas  must  be  repaired . Any oil, grease, or foreign particles must be removed by detergents, dilute HCL, later cleaned by plenty of water and allowed to complete dry.

PRIME COAT :

we recommend DIBHAPOXY -250 as prime coat, which being Waterbased Epoxy based  system  shall take care of dampness or moisture present in concrete surface.

TOP COAT     : DIBHALITE - CRC      [Two coats]

EPOXY MOTAR FOR REPAIRS

PRIMER            DIBHALITE -LV       [ Application as cited in literature ]

                                or

                            DIBHAPOXY -250     [ Application as cited in literature ]
MOTAR              Approximately 5 mm

                             DIBHALITE - CRC - ALPHA               80  PBW     -  100 PBV
                             DIBHALITE - CRC - BETA                100 PBW      -  100 PBV
                             QUARTZ SAND MIX NO 10               900 PBW      -  900 PBW
COVERAGE      10 Kgs of Mortars per Sq. Mtr for 5 Mm Thickness 

SEAL COAT    Mix DIBHALITE - CRC in equal proportionate as cited above with the coverage  of  40 - 50 sq.ft./per kg

Powered by : Needs Information Services Limited